When it comes to ball bushing, I believe many friends will not feel strange. Especially in recent years, with the continuous improvement of production technology and level of ball bushing, the types and models of ball bushing have become more and more. Its application fields are also becoming more and more.
In the process of using the ball bushing, it is inevitable that one or another problems will occur. In order to better solve these problems, we also need to do some corresponding inspections so that we can eliminate the faults in time. Let's give you a brief introduction.
When the ball bushing fails, it is also necessary to look at the situation of the ball bushing. Only better according to these conditions can we better carry out inspection and maintenance. For example, when the ball bushing makes a lot of noise, when the noise is very loud, it also needs to stop the machine for inspection to see if the ball bushing is unbalanced, that is, we often say that one side is particularly worn. Then it is necessary to replace the ball bushing in time.
In addition to the tumbling sound, when inspecting the ball bushing, it is also necessary to see whether there is oscillation. Generally speaking, there are many factors causing the oscillation of the ball bushing. In addition to partial damage, the oscillation of the ball bushing will also be caused when the waviness of the components is wrong. Therefore, in order to better solve these problems, it also needs to be checked in time.
In addition, in order to better prolong the service life of the ball bushing, it is also necessary to select a suitable smoothing agent during the use of the ball bushing. Here, it should be noted that the selection of smoothing agent should be appropriate rather than the most expensive. It can be said that different types of smoothing agents, It also has different effects on different types of ball bushing. In order to better select the ball bushing, we should also pay special attention to the details in this regard.
In addition, when inspecting the ball bushing, we should also look at the temperature of the ball bushing. Generally speaking, the temperature of the ball bushing will increase with the increase of operation, but after 1-2 hours, the temperature will basically be very stable. If the temperature of the ball bushing is found to be relatively high during the inspection, It is also necessary to see whether there are problems in the heat capacity, heat dissipation and speed of the ball bushing. If there are problems, they also need to be solved in time.
In general, in order to better prolong the service life of the ball bushing, professional technicians are also required to carry out better inspection and maintenance during inspection.
